Take back your torque with Gear Driven Performance. We all know monster tires rob your much-desired horsepower. To keep that ultimate performance and gain an extra 4″ of coveted lift, you want GDP.
The GDP portal lift system spares no details as the most comprehensive kit on the market. We know suspension and transferred over 10 years of suspension engineering into the GDP portal lifts. GDP starts by vertically relocating the axle centerline while retaining factory steering geometry – a must if you want to increase the life of your axles, differential, and drive train components. Pair that with a 1.4:1 gear reduction (approximately 30%), and you’ve got a performance driven machine!
Pair with SuperATV lift kits, A-Arms, and axles for extreme performance
30% gear reduction
Designed for all terrains and riding styles
You will not chop your axles. GDP is the only kit on the market compatible with aftermarket and OEM axles with no modifications
GDP maintains performance-ready axle angles
Impenetrable Bearings and Seals
First in the industry thrust bearing that is specifically designed to take axial load, unlike the standard bearing that is only sufficient for radial loads
Automotive grade bearings
Press fit, precision ground gears and shafts to eliminate unwanted slop
Precision-Ground Gears: drive gear, idler gear and driven gear
Precision-ground chromium titanium alloy gears for industry best performance
Eliminates friction for reduced heat, noise and allows you to run at higher speeds
Reduced friction build-up
Quiet gears at all speeds
Performs at machine’s fullest capacity
Heavy duty structural member
10.9 grade hardware
Modular design for improved functionality
CNC machined aluminum housing
Polished aluminum for long lasting, stylish finish.
Adjustability? Pair with our adjustable A-Arms
GDP understands the need for adjustability allowing you to custom tailor your machine to match your riding needs
Eliminates unwanted, premature tire wear caused from misalignment
Camber adjustability on all SuperATV A-Arms
Mounting Plates and Pivot Blocks
CNC formed, fully gusseted 5/16” mounting plates
Forged pivot blocks
Forged front mounting plates
Slotted Rotors for Unmatched Cooling
Each wheel hub includes 4 bolt patterns 4/156, 4/137, 4/115, 4/110
Ability to utilize different wheels on same hub
Stainless steel, braided brake lines included in each kit
Requires a 14″ or larger wheel
Wheels can not exceed 5″ backspacing
Recessed Nut Kit is NOT required when using Stock, Rhino Brand and ADR axles. But is required for most other aftermarket axles.
Max Tire Size
2″ Lift Kit
Measurements taken with suspension fully compressed and at max turn. Although these are not fully representative of normal riding conditions, stated tire sizes will not rub. With minimal rubbing or trimming, larger sizes can be used.
When filling gear box use only 80W-90 gear oil. Using grease will cause failure of gears and bearings. Using grease will void your warranty.
SuperATV extends the following limited lifetime warranty. This limited warranty extends only to the original purchaser. SuperATV warrants this product and its parts (excluding bearings, seals, & gaskets). Warranty is limited to material and / or workmanship defect at the time of shipment from the factory, and in no event shall seller have any liability for consequential damages of any kind resulting from a breach of this warranty. This warranty will be void on all products that show evidence of misapplication, improper installation, abuse, lack of proper maintenance, negligence, or alteration from original design. This warranty is in lieu of any other warranties, either expressed or implied, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTIBILTY OR FITNESS FOR ANY PARTICULAR PURPOSE.
Procedures for obtaining warranty service:
Should you have any problems with your Gear Driven Performance product, please call SuperATV Customer Service at 855-743-3427. Please have a copy of your original purchase receipt available, with dealer name (if applicable), date of purchase, and invoice number when calling for technical help. Most often, installation, or break in procedural issues (See break in procedure information, located in the instructions) can be handled quickly by speaking with one of our customer service representatives.
If it is determined that repairs are required to your Gear Driven Performance portal, you MUST acquire an RGA number from our customer service team. RGA’s and repair services are ONLY rendered by SuperATV. Any shipping costs incurred after 30 days (starting from the original purchase date) on any transmission returned for repair is the customer’s responsibility. ALL transmissions must be returned in the original box, with the original packaging, or a similarly well protected box. ALL portals must have the RGA number clearly written on the outside of the package. NO COD packages will be accepted, and no package will be accepted without an RGA number written on the outside of the box. RGA numbers are only valid for 30 days from the date of issue. Shipping information including address and method will be given to you by our customer service team.
Replacement bearings, seals and gaskets can be found here.